--- /dev/null
+#ifndef __REBOOT_MODE_H
+#define __REBOOT_MODE_H
+
+/* high 24 bits is tag, low 8 bits is type */
+#define REBOOT_FLAG 0x5242C300
+/* normal boot */
+#define BOOT_NORMAL (REBOOT_FLAG + 0)
+/* enter loader rockusb mode */
+#define BOOT_LOADER (REBOOT_FLAG + 1)
+/* enter recovery */
+#define BOOT_RECOVERY (REBOOT_FLAG + 3)
+/* enter fastboot mode */
+#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
+/* enter charging mode */
+#define BOOT_CHARGING (REBOOT_FLAG + 11)
+/* enter usb mass storage mode */
+#define BOOT_UMS (REBOOT_FLAG + 12)
+
+#endif
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/periph.h>
+#include <asm/arch/grf_rk3036.h>
+#include <asm/arch/boot_mode.h>
+#include <asm/arch/sdram_rk3036.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
+#define GRF_BASE 0x20008000
+
+static void setup_boot_mode(void)
+{
+ struct rk3036_grf *const grf = (void *)GRF_BASE;
+ int boot_mode = readl(&grf->os_reg[4]);
+
+ debug("boot mode %x.\n", boot_mode);
+
+ /* Clear boot mode */
+ writel(BOOT_NORMAL, &grf->os_reg[4]);
+
+ switch (boot_mode) {
+ case BOOT_FASTBOOT:
+ printf("enter fastboot!\n");
+ setenv("preboot", "setenv preboot; fastboot usb0");
+ break;
+ case BOOT_UMS:
+ printf("enter UMS!\n");
+ setenv("preboot", "setenv preboot; ums mmc 0");
+ break;
+ }
+}
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
int board_init(void)
{
return 0;
#include <clk.h>
#include <dm.h>
#include <ram.h>
+#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3288.h>
+#include <asm/arch/boot_mode.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
+#define PMU_BASE 0xff730000
+
+static void setup_boot_mode(void)
+{
+ struct rk3288_pmu *const pmu = (void *)PMU_BASE;
+ int boot_mode = readl(&pmu->sys_reg[0]);
+
+ debug("boot mode %x.\n", boot_mode);
+
+ /* Clear boot mode */
+ writel(BOOT_NORMAL, &pmu->sys_reg[0]);
+
+ switch (boot_mode) {
+ case BOOT_FASTBOOT:
+ printf("enter fastboot!\n");
+ setenv("preboot", "setenv preboot; fastboot usb0");
+ break;
+ case BOOT_UMS:
+ printf("enter UMS!\n");
+ setenv("preboot", "setenv preboot; if mmc dev 0;"
+ "then ums mmc 0; else ums mmc 1;fi");
+ break;
+ }
+}
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
int board_init(void)
{
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
struct udevice *pinctrl;
int ret;
- /*
- * We need to implement sdcard iomux here for the further
- * initlization, otherwise, it'll hit sdcard command sending
- * timeout exception.
- */
+ /*
+ * We need to implement sdcard iomux here for the further
+ * initlization, otherwise, it'll hit sdcard command sending
+ * timeout exception.
+ */
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/uart.h>
-#include <asm/arch-rockchip/grf_rk3036.h>
#include <asm/arch/sdram_rk3036.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
-#define GRF_BASE 0x20008000
-
void get_ddr_config(struct rk3036_ddr_config *config)
{
/* K4B4G1646Q config */
#define ROCKCHIP_BOOT_MODE_FASTBOOT 0x5242C309
-int board_late_init(void)
+int rk_board_late_init(void)
{
- struct rk3036_grf * const grf = (void *)GRF_BASE;
- int boot_mode = readl(&grf->os_reg[4]);
-
- /* Clear boot mode */
- writel(0, &grf->os_reg[4]);
-
- if (boot_mode == ROCKCHIP_BOOT_MODE_FASTBOOT ||
- fastboot_key_pressed()) {
+ if (fastboot_key_pressed()) {
printf("enter fastboot!\n");
setenv("preboot", "setenv preboot; fastboot usb0");
}
#endif
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_PREBOOT
-
#endif
BOOTENV
#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
#endif
BOOTENV
#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
#endif